Transporting On Public Roadway - Schulte FX-520 Operator's Manual

14.2 Transporting on Public Roadway

Only tow the Implement behind a properly sized and equipped Tractor
which exceeds the weight of the Implement by at least 20%.
tow the Implement behind a truck or other type of vehicle. Never tow the
Implement and another Implement connected in tandem. Never tow the
Implement at speeds over 20 MPH.
Your driving vision may be reduced or impaired by the tractor, cab, or implement. Before
driving on public roadways identify any limited vision areas, and make adjustments to your
operating position, mirrors, and the implement transport position so that you can clearly
see the area where you will be traveling, and any traffic that may approach you. Failure to
maintain adequate vision of the public roadway and traffic can result in serious injury or
even death.
Make certain that the "Slow Moving Vehicle" (SMV) sign is installed in
such a way as to be clearly visible and legible. When transporting the
Equipment use the Tractor flashing warning lights and follow all local
traffic regulations.
Extreme caution should be used when transporting the tractor and mower on public roadways. The tractor
must be equipped with all required safety warning features including a SMV emblem and flashing warning
lights to alert drivers of the tractor's presence. Remember that roadways are primarily designed for automotive
drivers and most drivers will not be looking out for you, therefore, you must look out for them. Check your side
view mirrors frequently and remember that vehicles will approach quickly because of the tractor's slower
speed. Be extremely cautious when the piece of equipment that you are towing is wider than the tractor tire
width and/or extends beyond your lane of the road.
Make sure that a proper size safety tow chain is secured between the tractor and implement before entering a
public road. Secure the center section at a safe transport height by inserting the transport lock pin. Secure the
cutter wings in the raised position with the transport lock pins.
The SMV (Slow-Moving Vehicle) emblem is
universal symbol used to alert drivers of the
presence of equipment traveling on roadways at a
slow speed. SMV signs are a triangular bright
orange with reflective red trim for both easy day
and night visibility. Make sure the SMV sign is
clean and visible from the rear of the unit before
transporting the tractor and implement on a public
roadway. Replace the SMV emblem if faded,
damaged, or no longer reflective. OPS-U- 0020
FX-520 06/16
© 2016 Alamo Group Inc.
OPERATION
(STI-10)
(SG-6)
Operation Section 4-48
(STI-06)
DO NOT