Storage And Parking Safety Instructions And Practices; Concluding Safety Instructions And Practices - Schulte FX-520 Operator's Manual

Rotary cutter

Table of Contents

Schulte Products use balanced and matched system components for blade carriers, blades, cuttershafts,

knives, knife hangers, rollers, drivetrain components, and bearings. These parts are made and tested to

Schulte Industry specifications. Non-genuine "will fit" parts do not consistently meet these specifications. The

use of "will fit" parts may reduce the performance, void Schulte warranties, and present a safety hazard. Use

genuine Schulte parts for economy and safety.

Be sure you have adequate knowledge of the property you will be working on. Take time to

make yourself aware of any area underwater or underground lines or cables. Contact with

buried lines or cable could result in serious injury or death.

In wet conditions where there is a likelihood of material collecting on the Implement, make

certain that this material is removed before traveling on public roadways.

Storage and Parking Safety Instructions and Practices

To prevent tipping of Implement when stored in folded position, use carrying wheels or

adequate stands on center frame.

In addition to the design and configuration of this Implement, including Safety Signs and Safety Equipment,

hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper

training of personnel involved in the operation, transport, maintenance, and storage of the machine. Refer

also to Safety Messages and operation instruction in each of the appropriate sections of the Tractor and

Equipment Manuals. Pay close attention to the Safety Signs affixed to the Tractor and Equipment.

FX-520 06/16

SAFETY

PARTS INFORMATION

(SPSI-1)

SEE YOUR SCHULTE DEALER

(S3PT-6)

Safety Section 1-15

(STL-1)

(STL-7)

(SG-18)

Table of Contents