Table of Contents
Advertisement
Replace bent or broken blades with new blades. NEVER ATTEMPT TO STRAIGHTEN,
WELD, OR WELD HARDFACING ON BLADES SINCE THIS WILL LIKELY CRACK OR
OTHERWISE DAMAGE THE BLADE WITH SUBSEQUENT FAILURE AND POSSIBLY
CAUSE SERIOUS INJURY FROM THROWN BLADES.
The operator's manual and safety signs affixed on
the unit contain important instructions on the safe
and proper use of the equipment. Maintain these
important safety features on the implement in good
condition to ensure the information is available to
the operator at all times.
•
Ensure the manual canister is secured to the
equipment with the operator's manual inside.
•
Ensure all safety signs are in place and legible.
Replace missing, damaged, and illegible
decals. OPS-U- 0011
•
Ensure the mower hitch is securely attached to
the tractor drawbar with a proper size bolt and
secured nut.
•
Ensure that a properly rated safety tow chain is
equipped securing the mower to the tractor.
•
Check that the main driveline is securely
attached to the tractor and the clamping cone is
seated in the groove of the PTO shaft.
•
Ensure the divider drivelines are secure at both
ends. OPS-R-0008
•
Ensure the tractor PTO master shield is in
place, lowered and in good condition.
•
Ensure each mower slip clutch shield is
secured in place and in good condition.
•
Ensure the driveline slip clutches are properly
adjusted and the friction plates are not frozen
together. Reference the Maintenance Section
for proper slip clutch maintenance.
•
Inspect the condition of driveline shear bolts. A
sheared bolt indicates that the driveline slip
clutch is frozen or damaged.
rated size and grade shear bolts indicated in
the maintenance section. OPS-R-0010_A
FX-520 06/16
© 2016 Alamo Group Inc.
OPERATION
Only use the
Operation Section 4-20
(SGM-10)
Advertisement
Table of Contents
