Table of Contents
Advertisement
Procedure for refilling the splitter gearbox:
1. To open the main shield use the Schulte latch
key (Part Number 227-002) provided to turn the
lock counter-clockwise, releasing the latch.
2. The Schulte latch key comes in place from the
factory, and can be stored in the Operators
Manual storage canister.
3. Park unit on a level surface.
4. Remove drain plug and drain out oil.
5. Reinstall drain plug.
6. Remove vent plug/dipstick.
7. Fill gearbox until oil level reaches the fill line on
dipstick. Capacity is approximately 2.7 litres
(2.85 qt.). Do not screw dipstick when checking
oil level.
8. Reinstall vent plug and level plug.
9. Dispose of old oil in accordance with the local
regulations.
10. Firmly close the main shield to engage the
automatic lock.
FX-520 06/16
© 2016 Alamo Group Inc.
MAINTENANCE
Maintenance Section 5-6
Advertisement
Table of Contents
