Replacing Remote Control Batteries - Code Alarm ca4B5 Owner's Manual

Replacing Remote Control Batteries

4 Button Remote Control - Model CAT4M
The batteries inside each remote control should last approximately 1 year under normal
use. When the batteries become weak you will notice the remote control range (the
distance from the vehicle the remote control will work) deteriorate and the small LED on
the remote control will dim. To replace the remote control batteries:
1. Remove 1 screw then disassemble the halves of the remote
control by unsnapping the back of the case.
2. Remove the old battery, observing the +/- symbols on the
batteries and replace with a new battery.
3. Reassemble the halves of the remote control and reinstall 1 screw.
4. Test operation of the remote control.
2020 Voxx Electronics Corporation. All rights reserved. 15