Replacing Remote Control Batteries - Code Alarm PROFESSIONAL SERIES Owner's Manual

Replacing Remote Control Batteries

1 Way Remote Control, CAT1LR:
The battery (model CR2032) inside each remote control should last approximately 1
year under normal use. When the battery becomes weak you will notice the remote
control range (the distance from the vehicle the remote control will work) deteriorate
and the small LED on the remote control will dim. To replace the battery in the remote
control:
1. Unsnap and disassemble the halves of the remote control.
2. Remove the old battery, observing the +/- symbols on the battery
and replace with new CR2032 battery.
3. Reassemble the halves of the remote control.
4. Test operation of the remote control.
2 Way Remote Control, CAT1TW6:
The battery (model CR250) inside each remote control should last approximately 10
months under normal use. When the battery become weak you will notice the remote
control range (the distance from the vehicle the remote control will work) deteriorate
and the small LED on the remote control will dim. To replace the battery in the remote
control:
1. Remove 1 screw and disassemble the halves of the remote control.
2. Remove the old battery, observing the +/- symbols on the battery
and replace with a new CR2450 battery.
3. Reassemble the halves of the remote control and reinstall the screw.
4. Test operation of the remote control.
8 2018 Voxx Electronics Corporation. All rights reserved.