Remote Control Buttons & Functions; Replacing Remote Control Batteries - Code Alarm CA 5055 Owner's Manual

Remote Control Buttons & Functions
4-Button
Transmitter
Lock
Unlock
Trunk
Car Finder
Panic
Remote Start
Remote Start
Shut Down
Run Time
Extention
2 / 3 Hour Start
Daily Start Timer

Replacing Remote Control Batteries

1-Way Remote Control (part # CAT4P)
The battery (model CR2032) inside each remote control should last approximately 1
year under normal use. When the battery becomes weak you will notice the remote
control range (the distance from the vehicle the remote control will work) deteriorate
and the small LED on the remote control will dim. To replace the remote control
battery:
1. Unsnap and disassemble the halves of the remote control.
2. Remove the old battery, observing the +/- symbols on the battery
and replace with a new CR2032 battery.
3. Reassemble the halves of the remote control.
4. Test operation of the remote control.
2017 Voxx Electronics Corporation. All rights reserved.
Lock Unlock
X
X
X
X
Car Find /
Start
Panic
X
X
X
X
X
X
X
Operation Method
Press and Release
Press and Release
Push and Hold (3 Sec)
Press and Release
Push and Hold (3 Sec)
Press and Release (1 or 2 times
depending on selectable option)
Push and Hold (3 Sec)
Press and Release 4 times.
Ignition ON/OFF, Press and Hold
Valet Button, Press Start 4 times
Press Lock + Start
9