Remote Control Buttons & Functions; Replacing Remote Control Batteries - Code Alarm CA 4055 Owner's Manual

Remote Control Buttons & Functions
1 Button Transmitter
Remote Start
Unlock
Remote Start Shutdown
2 / 3 Hour Start

Replacing Remote Control Batteries

1 Way Remote Control, CAT1B:
The battery (model CR2032) inside each remote control should last approximately 1
year under normal use. When the battery becomes weak you will notice the remote
control range (the distance from the vehicle the remote control will work) deteriorate
and the small LED on the remote control will dim. To replace the battery in the remote
control:
1.
2.
3.
4.
2017 Voxx Electronics Corporation. All rights reserved.
Unsnap and disassemble the halves of the remote control.
Remove the old battery, observing the +/- symbols on the battery
and replace with new CR2032 battery.
Reassemble the halves of the remote control.
Test operation of the remote control.
Start Operation Method
X Press and Release 2 times
Press and Release 2 times - During
X
remote start only
X Press and Hold (3 Sec)
Ignition On/OFF, Press and Hold Valet
X
Button, press and release Start 4 times
7