Download Print this page
Code Alarm PROFESSIONAL CA4B5 Owner's Manual
Code Alarm PROFESSIONAL CA4B5 Owner's Manual

Code Alarm PROFESSIONAL CA4B5 Owner's Manual

Hide thumbs Also See for PROFESSIONAL CA4B5:

Advertisement

Quick Links

PROFESSIONAL
SERIES
Owner's Guide
For Model:
CA4B5
Flashlogic FLRS
RF Upgrade Kit
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is
applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR
SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.
ca4B5 / FLRS 4280850 Owners rev A.
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the PROFESSIONAL CA4B5 and is the answer not in the manual?

Questions and answers

Summary of Contents for Code Alarm PROFESSIONAL CA4B5

  • Page 1 PROFESSIONAL SERIES Owner’s Guide For Model: CA4B5 Flashlogic FLRS RF Upgrade Kit IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY PRECAUTIONS may not apply.
  • Page 2 Table of Contents Using Your Remote Control ............3 Remote Start Valet Mode ............4 Transmitter Programming ............5 Replacing Remote Control Batteries ........6 2017 Voxx Electronics Corporation. All rights reserved.
  • Page 3 Using Your Remote Control Door Lock To lock the vehicle doors press and release the button. Door Unlock To unlock the vehicle doors press and release the button. Two Stage Door Unlock (Optional) If this feature is enabled on your system, pressing the button one time will unlock only the driver’s door.
  • Page 4 Entering the Vehicle while it is Running via Remote Vehicle Start Unlock the vehicle’s doors. Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL! Insert the key into the ignition switch and turn to the ON or RUN position. Press the brake pedal. The remote vehicle starter will disengage and the vehicle will operate normally.
  • Page 5 Transmitter Programming Turn the ignition ON. Press and hold the valet/override button located on the antenna. Within 10 seconds the LED’s will begin to flash. Press 1 button of each transmitter you wish to program, the LED’s will flash to confirm each transmitter. Turn the ignition OFF NOTE: This system has 1 button programming which programs all channels of the system.
  • Page 6 Voxx Electronics Corporation. Customer Service 1-800-421-3209 WWW.CODE-ALARM.COM FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.