Getting Started; Installation; Attach The Front Camera To The Window Mount; Inserting The Memory Card - Rexing V1P Gen3 User Manual

3. Getting Started

Installation

Video guide can be found at video.rexingusa.com.
Orient the
mount as shown
12
Plug Mini USB
Connector to the
Route power cable
to the Dashcam
Plug charger into
power outlet or
cigarette lighter
Step 1: Attach the front camera to the window
mount
Make sure that you mount the front camera in a safe,
appropriate location where it won't obstruct the driver's view.
Clean your windshield before applying the mount. Wait at least
20 minutes after applying the mount to the windshield before
attaching the camera.
Step 2.1: Inserting the Memory Card
The V1P Gen3 accepts Micro SD memory cards (class 10 or
higher) with a maximum capacity of 256GB.
Dashcam
Depending on the memory card manufacturer and type, some
cards may not be compatible with your device. Using an
incompatible card may damage the device or the memory
card or corrupt the data stored on it.
We highly recommend using Micro SD cards that are
specifically designated for use with dash cams. You can find
our recommendations on our website:
memory-card/.
Note: Before inserting or removing a memory card, first ensure
you've powered down the device.
www.rexingusa.com/
13