Connect The Car Charger To The Car's 12V Dc Outlet; Turning The Device On And Off; Basic Operation; Auotomatic Recording - Rexing V1P Gen3 User Manual

Mount the rear camera as shown above. Use the provided rear
camera cable to connect the rear camera to the front camera.
Step 5: Connect the car charger to the car's 12V
DC outlet
Run the cable down from your camera to the 12V cigarette
lighter port of your vehicle. Be sure to connect only Rexing-
approved chargers designed and supplied specifically for use
with your device. Using an incompatible charger can cause
serious personal injury or damage to your device.
Step 6: Turning the Device On and Off
Press and hold the Power button for a few seconds to turn on
the device. A welcome message
will be displayed onscreen.
To turn off the device, again
press and hold the Power
button for a few seconds.
A goodbye message will be
displayed onscreen.
The V1P Gen3 will switch on
and off automatically if you
keep it connected using the
car charger. The camera will
automatically start recording
when powered on. After
power is diconnected, the
device will shut down after 3
seconds.
18
Press and hold the Power
button to turn the device on
manually
Note: If your car cigarette lighter provides constant power, the unit
may not turn on and off automatically with the car.

4. Basic Operation

4.1 Automatic Recording
Recording (on)
Press the REC button
to stop recording
The device will automatically turn on and begin recording once
it receives power, such as when you start your car. The indicator
and the red dot icon on screen will flash while recording.
Display Control
To switch between camera views on the LCD display, hold the
MIC button. Press the POWER button will turn on or off the
LCD screen. Your display settings won't affect the way
recordings are captured.
On the rear camera, you can toggle the built-in switch to
horizontally flip the rear camera image.
Locking Videos
While recording, you can press the OK button to manually lock
Recording Time
19