Advertisement
Code Locator Function: Program 009
It is important to record all Codes in TABLE 1A for future reference. In the event of losing your records, this feature will help you locate as to where
a certain Code is located in the lock's memory. The unit will identify the Bank number (0-9) and User location (09) by flashing both the RED and
BLUE LED accompanied by a beeping sound.
[Master/Sub-Master/Manager Code] (#) (0) (0) (9) [Enter Code to be located]
EXAMPLE:
Assuming that the current Master, Sub-Master or Manager Code is (1) (2) (3) (4) (5) and you want to search for code: (1) (2) (3) (4) (5).
1.
Press (1) (2) (3) (4) (5)
2.
If the code entered is recognized, the following sequence will occur:
a)
At the start of the Code Locator sequence, the unit will flash both the BLUE and RED LED and emit one long beep.
b)
The unit will identify the Bank number by flashing the BLUE LED (with beeps) from 0 to 9 times.
c)
To signify the end of the Bank ID sequence, the unit will flash both the BLUE and RED LED with a long beep.
d)
The unit will identify the User number by flashing the BLUE LED (with beeps) from 0 to 9 times.
e)
To signify the end of the Bank ID sequence, the unit will flash both the BLUE and RED LED with a long beep.
3.
If the Code is not recognized, the lock will sound one long beep with a RED LED.
Note: If the Bank or User Number is zero, the BLUE LED will not flash and no beep can be heard.
Next Available Location finder: Program 000
When programming a User Access Code and you are not sure of the next available location, you can use this feature to exactly locate the next
available slot using the same procedure as the "Code Locator Feature".
EXAMPLE:
Assuming that the current Master, Sub-Master or Manager Code is (1) (2) (3) (4) (5) and you want to locate the next available location.
1.
Press (1) (2) (3) (4) (5)
2.
At the start of the "Next Available Location finder" sequence, the unit will flash both the BLUE and RED LED and emit one long beep.
3.
The unit will identify the Bank number by flashing the BLUE LED (with beeps) from 0 to 9 times.
4.
To signify the end of the Bank ID sequence, the unit will flash both the BLUE and RED LED with a long beep.
5.
The unit will identify the User number by flashing the BLUE LED (with beeps) from 0 to 9 times.
6.
To signify the end of the Bank ID sequence, the unit will flash both the BLUE and RED LED with a long beep.
No flash or tone means the corresponding number is zero.
If no available location is found, the unit will a programming error tone.
Key press Sound Option: Program 971, 972, 973
Normal Key press Sound + LED (Default)
[Master/Sub-Master/Manager Code] (#) (9) (7) (1)
Click! Key press Sound + LED
[Master/Sub-Master/Manager Code] (#) (9) (7) (2)
LED Only
[Master/Sub-Master/Manager Code] (#) (9) (7) (3)
(1) (2) (3) (4) (5)
(#) (0) (0) (9)
[Master/Sub-Master/Manager Code] (#) (0) (0) (0)
(#) (0) (0) (0)
10
Advertisement
