Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
DETAIL
CORNER SANDER
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2020 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
2019E-B
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
20j
57946
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Bauer 57946
Summary of Contents for Bauer 57946
- Page 1 2019E-B DETAIL CORNER SANDER Visit our website at: http://www.harborfreight.com 57946 Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
-
Page 2: Table Of Contents
Power tools create sparks any adapter plugs with earthed (grounded) which may ignite the dust or fumes. power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. Page 2 For technical questions, please call 1-888-866-5797. Item 57946... -
Page 3: Safety
Do not force the power tool. use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Item 57946 For technical questions, please call 1-888-866-5797. Page 3... - Page 4 Let the tool do the work. the safety of the power tool is maintained. g. To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately. Page 4 For technical questions, please call 1-888-866-5797. Item 57946...
- Page 5 Association, and the National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-prong plug.) Outlets for 2-prong plug Item 57946 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 Do not cover ventilation ducts. Keep flammable objects away. No Load Revolutions WARNING marking concerning n 0 xxxx/min. per Minute (RPM) Risk of Electric Shock. Properly connect power cord to appropriate outlet. Page 6 For technical questions, please call 1-888-866-5797. Item 57946...
- Page 7 Specifications Electrical Rating 120VAC / 60Hz / 1.2A No Load Speed 12,500/min Hook and Loop, Sandpaper 3-7/8" W x 5-1/2" L Item 57946 For technical questions, please call 1-888-866-5797. Page 7...
-
Page 8: Setup - Before Use
For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 14. Functions power Switch Handle power cord Dust Bag Base plate Page 8 For technical questions, please call 1-888-866-5797. Item 57946... -
Page 9: Setup
Base Plate so that dust can be collected into the Dust Bag. Press sandpaper firmly in place. 4. Remove used Sandpaper by peeling one edge away from the Base Plate Sandpaper until the whole sheet is free. Item 57946 For technical questions, please call 1-888-866-5797. Page 9... - Page 10 4. If abnormal noise/vibration occurs or the with the holes in the Base Plate so the Dust Bag Sandpaper/Dust Bag slip off, have the will collect dust during the sanding operation. problem corrected before further use. Page 10 For technical questions, please call 1-888-866-5797. Item 57946...
- Page 11 8. Periodically, stop the tool and check for: • Sandpaper wear. Replace worn Sandpaper as needed. • Dust accumulation in the Dust Bag (if not using a vacuum). Detach the Dust Bag, clean it, then reinstall it. Item 57946 For technical questions, please call 1-888-866-5797. Page 11...
-
Page 12: Maintenance
• any other condition that may affect its safe operation. WarninG! tO prEVEnt SEriOuS inJury: if the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician. Page 12 For technical questions, please call 1-888-866-5797. Item 57946... - Page 13 Use only proper type of disc accessory in good condition. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 57946 For technical questions, please call 1-888-866-5797. Page 13...
-
Page 14: Parts List And Diagram
Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175427847 when ordering parts. Page 14 For technical questions, please call 1-888-866-5797. Item 57946... - Page 15 Diagram Item 57946 For technical questions, please call 1-888-866-5797. Page 15...
-
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
Need help?
Do you have a question about the 57946 and is the answer not in the manual?
Questions and answers