Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Bauer Manuals
  4. Sander
  5. 21105E-B
  6. Owner's manual & safety instructions

Bauer 21105E-B Owner's Manual & Safety Instructions

9" variable speed drywall sander
Hide thumbs Also See for 21105E-B:

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual (or month and year of purchase if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21l

Advertisement

loading
Need help?

Need help?

Do you have a question about the 21105E-B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Bauer 21105E-B

Summary of Contents for Bauer 21105E-B

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Table Of Contents

    Table of Contents Safety ................2 Operation ..............10 Specifications ............9 Maintenance .............13 Setup .................9 Warranty ..............16 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

  • Page 3: Safety

    Electrical Safety 1. Power tool plugs must match the outlet. 4. Do not abuse the cord. Never use the cord Never modify the plug in any way. for carrying, pulling or unplugging the power Do not use any adapter plugs with grounded tool.
  • Page 4 Power Tool Use and Care 1. Do not force the power tool. 5. Maintain power tools. Check for misalignment Use the correct power tool for your application. or binding of moving parts, breakage of parts and any other condition that may affect the safer at the rate for which it was designed.
  • Page 5 be capable of stopping flying debris generated by 16. Do not use accessories that require liquid various operations. The dust mask or respirator coolants. Using water or other liquid coolants must be capable of filtering out particles generated may result in electrocution or shock. by your operation.
  • Page 6 Kickback and Related Warnings Kickback is a sudden reaction to a pinched or 1. Maintain a firm grip on the power tool and snagged rotating wheel, backing pad, brush position your body and arm to allow you or any other accessory. Pinching or snagging to resist kickback forces.
  • Page 7 Grounding TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug.
  • Page 8 Extension Cords 1. Grounded tools require a three wire extension cord. 7. Make sure the extension cord is properly wired Double Insulated tools can use either and in good electrical condition. Always replace a two or three wire extension cord. a damaged extension cord or have it repaired by a qualified electrician before using it.

  • Page 9: Specifications

    Specifications Electrical Rating 120VAC / 60Hz / 5A Speed : 600–1500/min Max. Accessory Diameter 9" (225mm) Setup - Before Use: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Power Switch is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.
  • Page 10 Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Power Switch is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.
  • Page 11 Attaching Extension Shaft 1. Loosen the Locking Sleeve on the Dust Locking Sleeve Outlet of the Main Handle. Do not Main remove the Sleeve from the Outlet. Handle 2. Align the Extension Handle with the Main Sleeve on Handle and insert the sleeve on the Extension Extension Shaft Shaft into the Outlet.
  • Page 12 General Instructions for Use TO PREVENT SERIOUS INJURY: Grip the tool firmly in both hands. 1. Wipe the work surface clean of all dirt and debris, 6. Press the Power Switch forward to start especially that of previous coarser the Sander. Press down on the front of the sanding sessions, which will scratch the Switch to lock it ON—press down on the surface of a finer grit sanding session.

  • Page 13: Maintenance

    Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Power Switch is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.
  • Page 14 Troubleshooting Problem Possible Causes Likely Solutions Tool will not start. 1. Cord not connected. 1. Check that cord is plugged in. 2. No power at outlet. 2. Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads.
  • Page 15 Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Replacement parts are not available for this item. Refer to UPC 193175457783. Item 59166 Page 15 For technical questions, please call 1-888-866-5797.

  • Page 16: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.