Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2018 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19d
Advertisement
Related Manuals for Bauer 1817C-B
Summary of Contents for Bauer 1817C-B
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
table of contents Safety ............2 Maintenance ..........2 Specifications ..........6 Parts List and Diagram ......10 Setup ............7 Warranty ............ 12 Operation ............ 2 WarninG SyMBOLS anD DEFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. -
Page 3: Safety
2. Electrical safety f. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing a. power tool plugs must match the outlet. and gloves away from moving parts. never modify the plug in any way. Do not use Loose clothes, jewelry or long hair any adapter plugs with earthed (grounded) can be caught in moving parts. - Page 4 c. Disconnect the plug from the power b. Disconnect the battery pack from the source and/or remove the battery pack, power tool before making any adjustments, if detachable, from the power tool before changing accessories, or storing power making any adjustments, changing tool.
- Page 5 stable, solid, nonflammable surface (such as a 9. Vibration Safety stable metal workbench or concrete floor) at This tool vibrates during use. least 1 foot away from all flammable objects, Repeated or long-term exposure to vibration may such as drapes or walls. Keep a fire cause temporary or permanent physical injury, extinguisher and a smoke detector in the area.
-
Page 6: Specifications
Symbology Read the manual before Double Insulated set-up and/or use. WARNING marking Volts concerning Risk of Fire. Do not cover Charger Alternating Current ventilation ducts. Charge on fireproof surface only. WARNING marking concerning Amperes Risk of Electric Shock. Properly connect Charger’s power No Load Revolutions n 0 xxxx/min. -
Page 7: Setup
Setup - Before use: read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 10. -
Page 8: Operation
Operating instructions read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Setting and testing tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn: Make sure that the Switch is in the off-position and remove its Battery pack before performing any procedure in this section. -
Page 9: Maintenance
Maintenance and Servicing instructions procedures not specifically explained in this manual must be performed only by a qualified technician. tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn: Make sure that the Switch is in the off-position and remove its Battery pack before performing any procedure in this section. tO prEVEnt SEriOuS inJury FrOM tOOL FaiLurE: Do not use damaged equipment. -
Page 10: Parts List And Diagram
parts List and Diagram pLEaSE rEaD tHE FOLLOWinG carEFuLLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. - Page 11 assembly Diagram Item 64943 For technical questions, please call 1-888-866-5797. Page 11...
-
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
Need help?
Do you have a question about the 1817C-B and is the answer not in the manual?
Questions and answers