Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Bauer Manuals
  4. Sander
  5. 1919C-B
  6. Owner's manual & safety instructions

Bauer 1919C-B Owner's Manual & Safety Instructions

20v cordless detail sander
Hide thumbs

Advertisement

Quick Links

Download this manual
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
For Best results use
3.0 amp Hour Battery
(Sold Separately)
20V CORDLESS
DETAIL SANDER
email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
Base
and undamaged. If any parts are missing or broken,
please call 1‑888‑866‑5797 as soon as possible.
plate
©
Copyright
2023 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
1919C-B
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
23c
56178

Advertisement

loading
Need help?

Need help?

Do you have a question about the 1919C-B and is the answer not in the manual?

Questions and answers

Related Manuals for Bauer 1919C-B

Summary of Contents for Bauer 1919C-B

  • Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. 1919C-B For Best results use 3.0 amp Hour Battery...

  • Page 2: Table Of Contents

    table of contents Safety ............2 Maintenance ..........12 Specifications ..........8 Parts List and Diagram ......14 Setup ............8 Warranty ............ 16 Operation ........... 11 WarninG SyMBOLS anD DeFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

  • Page 3: Safety

    electrical Safety Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. personal Safety 1. Stay alert, watch what you are doing and 4. remove any adjusting key or wrench use common sense when operating a before turning the power tool on.
  • Page 4 Battery tool use and care 1. recharge only with the charger specified by 3. When battery pack is not in use, keep it away the manufacturer. A charger that is suitable from other metal objects, like paper clips, for one type of battery pack may create a risk coins, keys, nails, screws or other small metal of fire when used with another battery pack.
  • Page 5 10. Hold power tool by insulated gripping surfaces 20. Use clamps (not included) or other practical only, when performing an operation where ways to secure and support the workpiece to the accessory may contact hidden wiring a stable platform. Holding the work by hand or its own cord.
  • Page 6 3. Do not position your body in the area where 4. use special care when working corners, sharp power tool will move if kickback occurs. edges etc. avoid bouncing and snagging the accessory. Corners, sharp edges or bouncing Kickback will propel the tool in direction opposite to the wheel’s movement at the point of snagging.
  • Page 7 Grounding tO preVent eLectric SHOcK anD DeatH FrOM incOrrect GrOunDinG Wire cOnnectiOn: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. never remove the grounding prong from the plug.

  • Page 8: Specifications

    Specifications Battery Type Bauer 20V Li‑Ion (sold separately) No Load Speed 11,000 OPM Hook and Loop, Sandpaper 5‑3/8" L x 3‑3/4" W Setup - Before use: read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
  • Page 9 installing the Sandpaper note; This Detail Sander uses 3. Remove used Sandpaper by peeling hook and loop Sandpaper. one edge away from the Base Plate until the whole sheet is free. 1. Before installing the sandpaper, make nOtice: Do not use torn or severely worn sure the Base Plate is free of dust and dirt, and press Detail Sander’s Switch off.
  • Page 10 Functions Switch Battery receptacle (on back) Base plate Page 10 For technical questions, please call 1-888-866-5797. Item 56178...

  • Page 11: Operation

    Operating instructions read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tool Set up tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the power Switch is in the off-position and remove its Battery pack before performing any procedure in this section.

  • Page 12: Maintenance

    Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the power Switch/trigger is in the off-position and remove its Battery pack before performing any procedure in this section. tO preVent SeriOuS inJury FrOM tOOL FaiLure: Do not use damaged equipment.
  • Page 13 troubleshooting problem possible causes Likely Solutions Tool will not start. 1. Battery Pack not properly connected. 1. Remove Battery Pack, make sure there are no obstructions, reinsert the Battery Pack according to its shape (it should only fit one way), and press firmly until the Battery Pack locks in place.

  • Page 14: Parts List And Diagram

    parts List and Diagram pLeaSe reaD tHe FOLLOWinG careFuLLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
  • Page 15 assembly Diagram record product’s Serial number Here: note: If product has no serial number, record month and year of purchase instead. Item 56178 For technical questions, please call 1-888-866-5797. Page 15...

  • Page 16: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.

This manual is also suitable for:

56178