Cruise Control Indicator Light; Cruise Control Set Indicator Light - Subaru 2011 Tribeca Owner's Manual

! To decrease the speed (by control
lever)
Push the control lever downward in the
"SET/COAST" direction and hold it until
the vehicle reaches the desired speed.
Then, release the control lever. The
vehicle speed at that moment will be
memorized and treated as the new set
speed.
When the difference between the actual
vehicle speed and the set speed is less
than 4 mph (6.8 km/h), the set speed can
be lowered 1 mph (1.6 km/h) each time by
pressing the control lever downward in the
"SET/COAST" direction quickly.
! To decrease the speed (by brake
pedal)
1. Depress the brake pedal to release
cruise control temporarily.
2. When the speed decreases to the
desired speed, press the control lever
downward in the "SET/COAST" direction
once. Now the desired speed is set and
the vehicle will keep running at that speed
without depressing the accelerator pedal.
& Cruise control indicator light
Refer to "Cruise control indicator light"
F3-20.
& Cruise control set indicator
light
Refer to "Cruise control set indicator light"
F3-21.
7-33
Starting and operating