Light Control Switch; Headlights - Subaru 2011 Tribeca Owner's Manual

3-26
Instruments and controls
display is giving an indication other than
the journey time, the display switches to
the journey time, flashes for 5 seconds,
and returns to its original indication each
time a complete hour has elapsed.
NOTE
The journey time is reset when the
ignition switch is turned to the "LOCK"
position. It is also reset if the ignition
switch is turned to the "LOCK" or
"Acc" position prior to restarting of
the engine.

Light control switch

WARNING
To prevent battery discharge result-
ing from accidentally leaving your
lights on when your vehicle is
parked, the light switch operates
only when the ignition switch is in
the "ON" position. In any other
position, the vehicle's lights will be
out.
If you park your vehicle on a road-
side at night, use the hazard warn-
ing flasher to alert the other drivers.
The light switch operates only when the
ignition switch is in the "ON" position.
& Headlights
To turn on the headlights, turn the knob on
the end of the turn signal lever.
first position
Parking lights, instrument panel illumina-
tion, tail lights and license plate light are
on.
second position
Headlights, parking lights, instrument pa-
nel illumination, tail lights, and license
plate light are on.