Temperature Gauge; Warning And Indicator Lights - Subaru 2007 B9 Tribeca Owner's Manual

It only operates when the ignition switch is
in the "ON" position.
NOTE
This light does not go out unless the
tank is replenished up to an internal
fuel quantity of approximately 4.0 US
gal (15 liters, 3.3 Imp gal).

Temperature gauge

1
1) Normal operating range
The temperature gauge shows engine
coolant temperature when the ignition
switch is in the "ON" position.
The coolant temperature will vary in ac-
cordance with the outside temperature
and driving conditions.
We recommend that you drive moderately
until the pointer of the temperature gauge
reaches near the middle of the range. En-
gine operation is optimum with the engine
coolant at this temperature range and high
revving operation when the engine is not
warmed up enough should be avoided.
If the pointer exceeds the normal
operating range, safely stop the ve-
hicle as soon as possible.
See the "In case of emergency" in
chapter 9.
300541
Instruments and controls

Warning and indicator lights

Several of the warning and indicator lights
come on momentarily and then go out
when the ignition switch is initially turned
to the "ON" position. This permits check-
ing the operation of the bulbs.
Apply the parking brake and turn the igni-
tion switch to the "ON" position. The fol-
lowing lights come on:
: Driver's seatbelt warning light
(The seatbelt warning light goes out only
when the driver fastens the seatbelt.)
: Front passenger's seatbelt warn-
ing light (The seatbelt warning light goes
out only when the front seat passenger
fastens the seatbelt.)
: SRS airbag system warning light
: CHECK ENGINE warning light/
Malfunction indicator lamp
: Charge warning light
: Oil pressure warning light
: AT OIL temperature warning light
– CONTINUED –
3-9