Low beam light bulbs
Right-hand side
1. Use a screwdriver to undo the clips on
the air intake duct, then remove the air in-
take duct. (right-hand side)
0
B00542
B00116
Left-hand side
2. Use a screwdriver to remove the se-
cured clip of the washer tank. To make it
easy to access the bulb, move the washer
tank to the horizontal direction. (left-hand
side)
Maintenance and service
B00541
B00542
B00116
3. Remove the bulb cover, by turning it
counterclockwise.
4. Disconnect the electrical connector.
5. Remove the retainer spring.
6. Replace the bulb, then set the retainer
11-43
B00340
B00341
– CONTINUED –