9-14
In case of emergency
1) Connect one jumper cable to the pos-
itive (+) terminal on the discharged bat-
tery.
2) Connect the other end of the jumper
(4)
cable to the positive (+) terminal of the
booster battery.
(3)
3) Connect one end of the other cable to
(2)
the negative (–) terminal of the booster
battery.
4) Connect the other end of the cable to
the strut mounting nut.
(1)
Make sure that the cables are not near
any moving parts and that the cable
clamps are not in contact with any other
metal.
900216