Acc; Start - Subaru 2007 B9 Tribeca Owner's Manual

3-4
Instruments and controls
The key can be turned from "ACC" to
"LOCK" only when the selector lever is in
the "P" position.

ACC

In this position the electrical accessories
(radio, accessory power outlet, etc.) can
be used.
ON
This is the normal operating position after
the engine is started.

START

300501
Do not turn the ignition switch to the
"START" position while the engine
is running.
The engine is started in this position. The
starter cranks the engine to start it. When
the key is released (after the engine has
started), the key automatically returns to
the "ON" position.
If your registered key fails to start the en-
gine, pull out the key once (the security in-
dicator light will blink), and then insert the
key in the ignition switch and turn it to the
"START" position and again try to start the
engine.
NOTE
The engine may not start in the follow-
ing cases:
The key grip is touching another key
or a metallic key holder.
The key is near another key that con-
tains an immobilizer transponder.
300502
300503