Memory Function (Driver's Seat Only - If Equipped) - Subaru 2007 B9 Tribeca Owner's Manual

1-4
Seat, seatbelt and SRS airbags
Seat cushion angle adjustment
(Driver's seat only)
To adjust the seat cushion angle, pull up
or push down the front end of the control
switch.
Seat height adjustment (Driver's
seat only)
100352
To adjust the seat height, pull up or push
down the rear end of the control switch.
Memory function (Driver's
seat only – if equipped)
Two of your favorite seat positions can be
registered. Register the seat position with
button "1" or "2" and retrieve the seat po-
sition by pressing either button.
The following seat positions can be regis-
tered:
Forward/backward position of the seat
Angle of seatback
Angle of seat cushion
Height of seat
Registration of seat position
Never adjust the seat while driv-
ing to avoid the possibility of loss
of vehicle control and of personal
injury.
Before adjusting the seat, make
sure the hands and feet of rear
seat passengers or luggage are
clear of the adjusting mechanism.
1. With the transmission selector lever in
the "P" position, adjust the seat position.
100353
2
1
SET
2. While pressing the "SET" button, press
the desired button "1" or "2".
3. The chime sounds once, and the seat
position is registered.
100804