Subaru 2003 Legacy Owner's Manual page 99

To turn the audible signal on, unlock the doors by pushing "UNLOCK/
DISARM" button and then simultaneously depress "LOCK/ARM" and
"UNLOCK/DISARM" buttons for more than two seconds. An electronic
chirp will sound one time and the turn signal lights will flash two times
to inform you that the audible signal has been turned on.
B Replacing the battery
CAUTION
Do not let dust, oil or water get on or in the transmitter when
replacing the battery.
When the transmitter battery begins to get weak, transmitter range will
begin to decrease and the LED will not illuminate. Replace the battery
as soon as possible.
To replace the battery:
1. Remove the two screws on the back of the transmitter case by
using a phillips screwdriver.
2. Separate the case.
3. Remove the old battery from the holder.
4. Replace with a new battery (Type CR2032 or equivalent) making
sure to install the new battery with the positive (+) side facing up.
5. Install the back half of the transmitter case.
6. Reinstall the two screws on the back of the transmitter case.
After the battery is replaced, the transmitter must be synchro-
HB1001BA
Keys and doors
Positive (+)
side facing up
HB1002BB
– CONTINUED –
2-9
2