Subaru 2003 Legacy Owner's Manual page 352

Hide thumbs Also See for 2003 Legacy:

Table of Contents

Connect one jumper cable to the positive (+) terminal on the

discharged battery.

Connect the other end of the jumper cable to the positive (+)

terminal of the booster battery.

Connect one end of the other cable to the negative (–) terminal

of the booster battery.

Connect the other end of the cable.

2.5 liter models: To the engine lifting bracket.

3.0 liter models: To the strut mounting nut.

Make sure that the cables are not near any moving parts and that

the cable clamps are not in contact with any other metal.

5. Start the engine of the vehicle with the booster battery and run it at

moderate speed. Then start the engine of the vehicle that has the dis-

charged battery.

6. When finished, carefully disconnect the cables in exactly the re-

verse order.

Chapters

Table of Contents

2003 outback