Subaru 2003 Legacy Owner's Manual page 51

D Have the seatbelt fully rolled up so that the tongue plates are
neatly stored. A hanging tongue plate can swing and hit against
the trim during driving, causing damage to the trim.
1. Insert a key or other hard pointed object into the slot in the con-
nector (buckle) on the right-hand side and push it in, and the connec-
tor (tongue) plate will disconnect from the buckle.
2. Allow the retractor to roll up the belt. You should hold the webbing
end and guide it back into the retractor while it is rolling up. Neatly
store the tongue plates in the recess in the retractor and then insert
the connector (tongue) plate into the slot located at the front of the
recess.
Seat, seatbelt and SRS airbags
HB1036BA
HB1038CA
HB1037BA
HB1048BA
– CONTINUED –
1-27
1