Subaru 2003 Legacy Owner's Manual page 247

Interior equipment
B Using the cover
HB7015BA
To extend the cover, pull the end of the cover out of the housing, then
insert its hooks into the catches as shown. To rewind it, unhook it from
the catches and it will rewind automatically. You should hold on to the
6
cover and guide it back into the cover housing while it is rewinding.
B To remove the cover
HB7016BA HB7017BA
1. Rewind the cover.
2. To take it off the cover rails, lift it out while pressing the release
knobs located both sides of the cover housing.
3. Store the cover in the cargo area.
To install the cover:
Hang the both ends of the cover housing on the cover rails. Make
sure that the cover is mounted securely by pulling it up.
– CONTINUED –
6-23