Subaru 2003 Legacy Owner's Manual page 201

This dial is used for bass/middle/treble controls when the "AUDIO"
2
button is in the depressed position. It is also used for fader/balance
controls when the "BAL" button
Display Control mode
BASS Bass control
MIDDLE Middle note
control
TREBLE Treble control
FADER Fader control
BALANCE Balance control
VOLUME Volume control
n Tone control
The volume control dial
dial become a control for Bass, Middle note or Treble when you select
the appropriate tone control mode.
Choose desired level for each mode by turning the volume control
dial. The control function returns to volume control mode after about 5
seconds.
To change control modes: Each brief press of the "AUDIO" button
2
changes control modes in the following sequence starting from
bass control mode. (When the radio is first turned on, the control
mode is in the volume control.)
3
is in the depressed position.
Turn counterclockwise
For less bass
For less middle note
For less treble
To increase rear speaker
volume and decrease
front speaker volume
To increase left speaker
volume and decrease
right speaker volume
For less volume
1
normally function as volume control. The
Audio
HB5036BA
Turn clockwise
For more bass
For more middle note
For more treble
To increase front speaker
volume and decrease
rear speaker volume
To increase right speaker
volume and decrease left
speaker volume
For more volume
– CONTINUED –
5-17
5