Subaru 2003 Legacy Owner's Manual page 425

Hide thumbs Also See for 2003 Legacy:

Table of Contents

Maintenance and service

1. Turn the ignition switch to the "LOCK" position and turn off all electri-

cal accessories.

2. Remove the cover.

(For behind the coin tray: open the coin tray and pull it horizontally to

3. Determine which fuse may be blown. The back side of each fuse box

cover and the "Fuse and circuits" section in chapter 12 in this manual

show the circuit for each fuse.

4. Pull out the fuse with the fuse puller.

5. Inspect the fuse. If it has blown, replace it with a spare fuse of the

same rating.

6. If the same fuse blows again, this indicates that its system has a

problem. Contact your SUBARU dealer for repairs.

– CONTINUED –

Chapters

Table of Contents

2003 outback