Subaru 2003 Legacy Owner's Manual page 211

B Power switch and volume/bass/treble/fader/balance control
(ON/VOL)
1
The dial is used for both power (ON/OFF) and volume control. The
radio is turned ON and OFF by pushing the dial and the volume is
controlled by turning the dial.
This dial is used for bass/treble controls when the "BASS/TREB" but-
8
ton is in the depressed position. It is also used for fader/balance
controls when the "FAD/BAL" button
Display Control mode
BASS Bass control
TREB Treble control
FAD Fader control
BAL Balance control
VOL Volume control
n Tone control
The volume control dial
dial become a control for Bass or Treble when you select the ap-
propriate tone control mode.
Choose desired level for each mode by turning the volume control
dial. The control function returns to volume control mode after about 5
seconds.
6
is in the depressed position.
Turn counterclockwise
For less bass
For less treble
To increase rear speaker
volume and decrease front
speaker volume
To increase left speaker
volume and decrease right
speaker volume
For less volume
7
normally function as volume control. The
Audio
HB5036BA
Turn clockwise
For more bass
For more treble
To increase front speaker
volume and decrease rear
speaker volume
To increase right speaker
volume and decrease left
speaker volume
For more volume
– CONTINUED –
5-27
5