Remove Battery Cover And Battery <= Ssr Task - IBM Power775 Service Procedure

Power775 Time of Day (TOD) Battery Service Procedure
3.2 Remove Battery Cover and Battery <= SSR TASK
Open the front door of the frame.
STEP 8
Locate the battery to be replaced. This battery will have the amber colored battery ID
STEP 9
LED illuminated which is included in the lower left of the blue battery cover. Be sure to leave the
hoses connected to DCCA as it requires water cooling.
Remove the battery cover by first depressing the tab on the top of blue battery cover as
STEP 10
indicated in Figure 6.
While depressing the top tab, pull the top of the blue battery cover towards you while
STEP 11
leaving the bottom tab engaged in the DCCA. Do this in a rocking fashion as seen in Figure 7. The
last step is to pull the bottom of the blue battery cover out of the DCCA.
STEP 12 Remove the old battery from the DCCA by gripping the top and bottom of the battery
and pulling it straight back towards you as seen in Figure 8.
PN: 41U8496, EC N44172
Figure 6 Depressing Blue Battery Cover Tab
Figure 7 Removing Blue Battery Cover
Figure 8 Battery Removal
Page 12 of 23