Safety Belt Care; Replacing Safety Belt System Parts After; Crash - Pontiac 2010 Vibe Owner's Manual

2-22 Seats and Restraints

Safety Belt Care

Keep belts clean and dry.
{
CAUTION
Do not bleach or dye safety belts.
It may severely weaken them.
In a crash, they might not be able
to provide adequate protection.
Clean safety belts only with mild
soap and lukewarm water.
Replacing Safety Belt
System Parts After
a Crash
{
CAUTION
A crash can damage the
safety belt system in the vehicle.
A damaged safety belt system
may not properly protect the
person using it, resulting in serious
injury or even death in a crash.
To help make sure the safety belt
systems are working properly after
a crash, have them inspected and
any necessary replacements made
as soon as possible.
After a minor crash, replacement of
safety belts may not be necessary.
But the safety belt assemblies
that were used during any crash
may have been stressed or
damaged. See your dealer/retailer
to have the safety belt assemblies
inspected or replaced.
New parts and repairs may be
necessary even if the safety belt
system was not being used at
the time of the crash.
Have the safety belt pretensioners
checked if the vehicle has been in
a crash, or if the airbag readiness
light stays on after you start
the vehicle or while you are driving.
See Airbag Readiness Light on
page 4-12.