Pontiac 2010 Vibe Owner's Manual page 218

9-34 Vehicle Care
3. Unplug the connector while
pressing down on the release tab.
4. Pull the old bulb straight out.
5. Push the new bulb straight
in until it clicks.
6. Push the bulb socket into the
headlamp assembly and turn
it clockwise to secure it in
its original location.
Front Turn Signal Lamp and
Parking Lamp
To replace the Front Turn Signal
Lamp or Parking Lamp:
1. Open the hood. See Hood on
page 9-5.
2. Turn the bulb socket
counterclockwise and pull
it out of the lamp assembly.
3. Pull the old bulb straight out of
the bulb socket.
4. Push the new bulb straight in
until it clicks.
5. Push the bulb socket into
the lamp assembly and turn
clockwise to secure it in its
original location.