Pontiac 2010 Vibe Owner's Manual page 124

6-10 Infotainment System
( )
FWD REV (Fast Forward/
Fast Reverse): Press and hold
to advance playback quickly within a
track. Release to resume playing the
)
track. Press and hold
playback quickly within a track.
Release to resume playing the track.
BAND: Press to listen to the radio
when a CD is playing.
CD/AUX (CD/Auxiliary): Press to
play a CD when listening to the
radio.
Press the CD/AUX button again and
the system begins playing audio from
the connected portable audio player.
If a portable audio player is not
connected, "No Aux Input Device"
displays.
See "Using the Auxiliary Input Jack"
later in this section.
INFO (Information): Press to
switch the display between the track
(
number, elapsed time of the track,
and the time. When the ignition is off,
press this button to display the time.
to reverse
EQ (Equalization): Press to select
an equalization setting while playing
a CD. See "EQ" listed previously for
more information. If an EQ setting is
selected for a CD, it is activated each
time a CD is played.
Care of CDs
The sound quality of the CD player
can be reduced because of:
•
The CD-R quality.
•
The method of recording
the CD-R.
•
The quality of the music that has
been recorded on the CD-R.
•
The way the CD-R has been
handled.
Store CD-R(s) in their original cases
or other protective cases and away
from dust and direct sunlight. The
CD player scans the bottom surface
of the disc. If the surface of a CD
is damaged, such as cracked,
broken, or scratched, the CD may
not play properly or at all. Do not
touch the bottom side of a CD while
handling it; this could damage the
surface. Pick up CDs by grasping the
outer edges or the edge of the hole
and the outer edge.
To clean a CD, use a soft lint free
cloth, or dampen a clean soft
cloth in a mild neutral detergent
solution mixed with water. Wipe the
CD from the center to the edge.