Panasonic WV-SFN480PJ Operating Instructions Manual page 133

1.
Set the video motion detection area by dragging the mouse on the screen.
→
The designated area will become the VMD area "1(White)" and the outline will be displayed. When 2
- 4 VMD areas are set, each area will be numbered in order. The areas will be identified by the
respective outline colors. The "Status" of the outline to be set for the area will become "On".
Note
•
When "Fisheye", "Single PTZ", or "Panorama" is selected for "Image capture mode", 4 areas can
be configured.
•
When "Double Panorama" is selected for "Image capture mode", 2 areas can be configured for
each of the upper and lower images.
13 Configure the alarm settings [Alarm]
Operating Instructions 133