Replacement Bulbs - Pontiac 2005 Aztek Owner's Manual

Hide thumbs Also See for 2005 Aztek:
Table of Contents

Advertisement

4. Unscrew the bulb socket from the lamp assembly
by pressing the tab while turning the bulb socket
counterclockwise.
5. Replace the bulb by pulling the old one out and
gently pushing the new one into the bulb socket.
6. Line up the tabs on the bulb socket with the gaps in
the socket holes and screw the bulb socket back
into the lamp housing. You will hear a click.
5-50
A. Stop/Taillamps
B. Back-up Lamps
7. Reinstall by aligning the pins on the back of the
lamp with the sockets on the outboard side of the
lamp opening.
8. Push forward until the pins snap into the socket.
9. Reinstall the screws removed in Step 2.

Replacement Bulbs

Exterior Lamp
Back-up Lamps (Bottom)
Front Turn Signal/
Parking/
Sidemarker Lamps
Headlamps
High-beam
Low-beam
Stop/Taillamps (Top)
For replacement bulbs not listed here, contact
your dealer.
Bulb Number
3155K
3057
9005
9006
3057K

Advertisement

Table of Contents
loading

Table of Contents