Pontiac 2005 Aztek Owner's Manual page 174

Entering Programming Mode
To program features, your vehicle must be in the
programming mode. To enter this mode, do the
following:
1. Turn the ignition key to ON with the vehicle in
PARK (P).
2. Press and release the MODE button, then scroll
through the DIC messages until PRESS SET TO
BEGIN PERSONALIZATION is displayed.
3. Press the SET button and TO SELECT DRIVER
PRESS REMOTE LOCK will appear. Press the
LOCK button on the remote keyless entry
transmitter. This identifies which remote keyless
entry transmitter is being programmed by displaying
PERSONALIZATION FOR DRIVER 1 or DRIVER 2.
3-52
United States
4. The program mode message will appear in the
message center as an indication that your vehicle
is ready to begin programming.
5. Follow the instructions given by the DIC.
Headlamp Exit Delay
This feature allows you to customize the headlamps
and parking lamps.
OFF: The headlamps and parking lamps will not turn
on at the same instant that the ignition is turned to OFF.
15: The headlamps and parking lamps will stay on
for 15 seconds when the ignition is turned to OFF.
30: The headlamps and parking lamps will stay on for
30 seconds when the ignition is turned to OFF.
60: The headlamps and parking lamps will stay on for
60 seconds when the ignition is turned to OFF.
Canada