Name Of Each Component (Main Unit) - Konica Minolta bizhub C3320i Quick Manual

4.2

Name of each component (main unit)

4.2 Name of each component (main unit)
Front/side
No. Name
1 Control Panel
2 Automatic Document
Feeder
3 ADF Feed Cover
4 Lateral Guide
5 Original Tray
6 Original Output Tray
7 Document Stopper
8 Power Connection
9 Bypass Tray
10 Main Power Switch
11 USB Port (Type A)
USB2.0/1.1
12 Tray 1
13 Mobile Touch Area
14 Data Indicator
15 Output Tray
bizhub C3320i
Description
Used to configure various settings in this machine.
Automatically feeds and scans originals by page. This unit scans a 2-
sided original by only requiring the paper be fed into the machine once
without reversing.
This unit is referred to as ADF in the manual.
Open this cover when clearing a paper jam in the ADF.
Adjust this guide along the width of the original.
Load the original face up in this tray.
The scanned original is fed out onto this tray.
Used to prevent the output original from falling.
Connect the power cord to this inlet to supply power to this machine.
Used to print data on non-standard size paper or envelopes.
Press this switch to turn the machine on or off.
Used to connect an external memory unit (USB memory unit) to this
machine.
Allows you to load up to 500 sheets.
This area is used to associate this machine with an NFC-compatible
Android terminal or an iOS terminal compatible with Bluetooth LE.
Flashes or lights up to indicate the data receiving status on this ma-
chine.
Outputs printed pages.
4
4-5