Name Of Each Component (Main Unit) - Konica Minolta bizhub C550i Quick Manual

4.2

Name of each component (main unit)

4.2 Name of each component (main unit)
Front
No. Name
1 Reverse Automatic
Document Feeder
2 Left Cover Release
Lever
3 Left Cover
4 Lateral Guide
5 Original Tray
6 Original Output Tray
7 Control Panel
8 Stylus Pen
9 USB Port (Type A)
USB2.0/1.1
10 Right Door
11 Bypass Tray
12 Right Door Release
Lever
13 Main Power Switch
14 Tray 1, Tray 2
15 Lower Front Door
16 Upper Front Door
17 Mobile Touch Area
18 Power key
bizhub C650i/C550i/C450i
Description
Automatically feeds and scans originals by page. This unit scans a 2-
sided original by only requiring the paper be fed into the machine once
without reversing.
This unit is referred to as ADF in the manual.
Used to open the Left Cover.
Open the Left Cover when clearing a paper jam.
Adjust this guide along the width of the original.
Load the original face up in this tray.
The scanned original is fed out onto this tray.
Used to configure various settings in this machine.
Used to select a menu on the Touch Panel, or enter characters.
Used to connect an external memory unit (USB flash drive) to this ma-
chine.
Open this door to clear a paper jam.
Used to print data on irregularly size paper, thick paper, transparen-
cies, postcards (4 e 6 (A6 Card)), envelopes, or label sheets.
Used to lock the Right Door.
Press this switch to turn the machine on or off.
Allows you to load up to 500 sheets of plain paper.
Open this door to replace the Waste Toner Box, and to clean the
Print Head Glass.
Open this door to replace a Toner Cartridge.
This area is used to associate this machine with an NFC-compatible
Android terminal or an iOS terminal compatible with Bluetooth LE.
Switches this machine to the Power Save mode.
4
4-7