Konica Minolta bizhub C3320i Quick Manual page 15

Hide thumbs Also See for bizhub C3320i:
Table of Contents

Advertisement

1.4
Regulation notices
Electromagnetic Interference
This product must be used with a shielded interface cable.
The use of non-shield cables is likely to result in interference with radio communications and is prohibited
under CISPR and local rules.
Laser safety
This is a digital machine which operates using a laser. There is no possibility of danger from the laser provided
the machine is operated according to the instructions in the manuals.
Since radiation emitted by the laser is completely confined within protective housing, the laser beam cannot
escape from the machine during any phase of user operation.
This machine is certified as a Class 1 laser product per IEC 60825-1: 2014: This means the machine does not
produce hazardous laser radiation.
Internal laser radiation
Maximum Average Radiation Power: 8.3 μW at the laser aperture of the print head unit.
Wavelength: 770-800 nm
This product employs a Class 3B laser diode that emits an invisible laser beam.
The laser diode and the scanning polygon mirror are incorporated in the print head unit.
The print head unit is NOT A FIELD SERVICE ITEM:
Therefore, the print head unit should not be opened under any circumstances.
CDRH regulations
This machine is certified as a Class 1 Laser product under Radiation Performance Standard according to the
Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for Laser products marketed in the United
States and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration of the U.S. Department of Health and Human Services (DHHS). This means that the device
does not produce hazardous laser radiation.
The label shown on page 1-12 indicates compliance with the CDRH regulations and must be attached to la-
ser products marketed in the United States.
7WARNING
Use of controls, adjustments or performance of procedures other than those specified in this manual
may result in hazardous radiation exposure.
-
This is a semiconductor laser. The maximum power of the laser diode is 25 mW and the wavelength is
770-800 nm.
bizhub C3320i
Laser Aperture of
the Print Head Unit
1
1-11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents