Table of Contents
Advertisement
en Rapid heating
Press the type of heating.
2.
Turn the rotary selector to select the required type
3.
of heating.
a The corresponding recommended temperature ap-
pears on the display.
Changing the temperature
Once the operation has started, you can change the
temperature directly.
Use the rotary selector to change the temperature.
▶
a The temperature is applied immediately.
9 Rapid heating
To save time, you can shorten the preheating time for
set temperatures of 100 °C and higher.
You can use rapid heating for this type of heating:
¡ 4D hot air
¡ Top/bottom heating
¡ Intensive heat
9.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note: Do not set a cooking time until rapid heating has
come to an end.
10 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
10.1 Overview of the time-setting options
You can set a cooking time and an operation end time
on the appliance. The timer runs independently of the
appliance during the operation.
Time-setting
Use
option
Timer
You can set the timer to run inde-
pendently of the appliance during op-
eration. It does not affect the appli-
ance.
Cooking time
If you set a cooking time, the appli-
ance will stop heating automatically
once this time has elapsed.
End time
Along with the cooking time (dura-
tion), you can set the time at which
you want cooking to end. The appli-
ance starts up automatically so that it
finishes cooking at the required time.
16
8.7 Displaying information
In most cases, you can call up information about the
function that you have just started. The appliance auto-
matically displays certain information, e.g. to ask you to
do/confirm something or to issue a warning.
Press
.
▶
a When available, information is displayed for a few
seconds.
Set a suitable type of heating and a temperature of
1.
at least 100 °C.
Press
.
2.
a The
symbol appears on the left of the display
next to the temperature.
a The progress line begins to fill up.
3.
a When rapid heating has come to an end, a signal
tone sounds. The
display.
Place the food in the cooking compartment.
4.
Cancelling rapid heating
Press
.
▶
a The
symbol disappears from the display.
10.2 Setting the timer
The timer runs independently during the operation. The
timer can be set when the appliance is switched on or
off, up to 24 hours. The timer has its own audible sig-
nal so that you can tell whether it is the timer or a
cooking time that has elapsed.
Press
.
1.
a The field for the timer opens.
2.
Use the rotary selector to set the timer duration.
a The timer starts automatically after a few seconds.
a The
symbol and the time counting down are dis-
played on the left in the status bar.
a The timer counts down.
a When the timer duration has elapsed, a note ap-
pears on the display and an audible signal sounds.
Once the timer duration has elapsed:
3.
Press
to silence the audible signal manually.
‒
To set another timer, press
‒
selector to set the duration.
Changing the timer
You can change the timer duration at any time.
Press
.
1.
Use the rotary selector to change the timer duration.
2.
Press
to confirm.
3.
Cancelling the timer
You can cancel the timer duration at any time.
Press
.
1.
symbol disappears from the
and use the rotary
Advertisement
Table of Contents
