Table of Contents
Advertisement
2-3.
LOCATION
2-4.
ELECTRICAL
CONNECTION
Jan. 2014
The unit should be placed on a supportive structure or shelf so the
entire bottom of the unit is evenly supported, and also, where the
pans can be removed without interruption and easy loading and
unloading of product. For proper operation, the cabinet must be
level.
Access to the controls are on the side of the unit. The controls do not
need to be accessed for normal operation.
The data plate, located on the side of the unit on the MPC-21L &
222, specifies the correct electrical supply. The unit requires a
grounded receptacle with a separate electrical line protected by a
fuse or circuit breaker of the proper rating. Electrical code may also
require GFCI protection.
To avoid electrical shock, the cabinet must be
adequately and safely grounded (earthed) according
to local electrical codes.
The units are supplied with a 4 foot (274.3 cm) power cord.
Refer to the table below for electrical ratings:
Product Number
MPC-21L
MPC-222
MPC-21L
MPC-21L
(FOR EQUIPMENT WITH CE MARK ONLY!)
To prevent electric shock hazard this appliance must be
bonded to other appliances or touchable metal surfaces
in close proximity to this appliance with an equipotential
bonding conductor. This appliance is equipped with an
equipotential lug for this purpose. The equipotential lug is
marked with the following symbol
5
Volts
Watts
120
110
120
400
230
110
230
400
Amps
.92
3.3
.47
1.74
Advertisement
Table of Contents
