Remote Control Functions - Tecnosystemi Apply PICO CLEAN 30 User Manual

REMOTE CONTROL FUNCTIONS

DESCRIPTION OF USE OF REMOTE CONTROL KEYS
1. Turn on
ON
2. Turn off
OFF
3. Speed setting
4. Operating Symbols
MODE
AUTO1
AUTO2
- On / turning the appliance on
- Setting the humidity value
- Off / turning the appliance off
- Reset alarm filter cleaning
Minimum speed / humidity value 40%
Medium speed / humidity value 50%
Maximum speed / humidity value 60%
MODE
It allows the following operation modes to be selected
Intake-Extraction (light blue icon)
The device works for 70 seconds in intake mode and for 70 seconds on aeration mode, with
the possibility to regulate the three speeds.
Extraction (green icon)
The device works in internal air extraction mode only, with the possibility to regulate the three
speeds
Aeration (purple icon)
The device works in aeration mode only, taking in air from outside and introducing it
into the room. Option to regulate the three speeds provided.
Auto1 (yellow icon)
The device is in stand-by. When the air in the environment exceeds the threshold of
settable humidity at 40%, 50% or 60%, the device starts in the intake-extraction
mode until it brings the humidity back within the set value.
Auto2 (white icon)
The device is in stand-by. When the air in the environment exceeds the threshold of
settable humidity at 40%, 50% or 60%, the device starts in the extraction only mode
until it brings the humidity back within the set value.
Filter maintenance (red LED)
Flashing red led
It indicates the need to perform the maintenance of filters and of the fill media
Setting the humidity value (blue LED)
When the blue LED comes on, it indicates access to the humidity value settings mode.
It is possible to set the humidity threshold on three different values 40%, 50% or 60%.
27