Assembly Warnings - Tecnosystemi Apply PICO CLEAN 30 User Manual

ASSEMBLY WARNINGS

The intake-extractor unit must
be disconnected from the mains
supply before carrying out any
installation or repair operation.
Do not place any radiators or other
devices near the power cord of the
recovery unit.
When installing the intake-
extractor unit, follow specific
safety regulations for electrical
equipment.
Do not change the length of the
power cord at your own discretion.
Do not bend the power cord. Do
not damage the power cord.
SAFETY OPERATING WARNINGS
Do not touch the controls and the
remote controls with wet hands. Do
not perform maintenance operations
on the intake-extractor unit with wet
hands
Do not block the air duct of the
intake-extractor unit when it is on
Do not allow children to use the
intake-extractor unit
Keep explosive and flammable
products away from the intake-
extractor unit
In the event of unusual noises
or smoke, disconnect th e intake-
extractor unit from the wall outlet
and contact customer service
The intake-extractor unit must
not be used outside the temperature
range indicated in the user manual
or in aggressive or explosive
atmospheres.
Do not use damaged equipment
or wires to connect the recovery
unit to the mains.
Carefully remove the intake-
extractor unit from the
packaging.
Use the intake-extractor unit
only in accordance with the
manufacturer's specifications.
Do not wash the intake-extractor
unit with water. Protect the parts
of the unit from water seepage.
Disconnect the intake-extractor
unit from the mains before
maintenance
Do not damage the power cord
while using th e intake-extractor
unit
Do not place objects on the
power cord.
Do not open the intake-extractor
unit while operating
Make sure that the air emitted
by th e intake-extractor unit is
not directed at naked flames or
candles
21