Qsan Technology XCubeFAS 3126 Hardware Manual page 83

2. You must use terminal software such as HyperTerminal or Putty to open the console after
the connection is made.
INFORMATION
For more information about terminal software, please refer to
HyperTerminal:
PuTTY:
3. Here we first demonstrate HyperTerminal. The console settings are on the following.
Baud rate: 115200, 8 data bit, no parity, 1 stop bit, and no flow control
Terminal type: vt100
Support and Other Resources
66
© 2021 QSAN Technology, Inc. All rights reserved.
www.qsan.com
http://www.hilgraeve.com/hyperterminal/
http://www.putty.org/
XCubeFAS 3126
Hardware Manual
Official
Document