Download Print this page
Caple C738G Instruction Manual

Caple C738G Instruction Manual

Advertisement

Quick Links

Advertisement

loading
Need help?

Need help?

Do you have a question about the C738G and is the answer not in the manual?

Questions and answers

Summary of Contents for Caple C738G

  • Page 2: General Notice

    Dear Customer, We thank you and congratulate you on granting us your preference, by purchasing one of our products. We are sure that this new appliance, manufactured with quality materials, will meet your requirements in the best possible way. The use of this new equipment is easy. However, we invite you to read this booklet carefully, before installing and using the appliance.
  • Page 3: Instructions For The User

    INSTRUCTIONS FOR THE USER It is necessary that all the operations regarding the installation, adjustment and adaptation to the type of gas available are carried out by qualified personnel, in conformity with the regulations in force. The specific instructions are described in the booklet section intended for the installer. USING THE BURNERS the lighting point (large flame, fig.
  • Page 4 INSTRUCTIONS FOR THE INSTALLER IMPORTANT NOTICE: THE OPERATIONS INDICATED BELOW MUST BE FOLLOWED BY QUALIFIED PERSONNEL EXCLUSIVELY, IN CONFORMITY WITH THE REGULATIONS IN FORCE. THE MANUFACTURING FIRM REFUSES ALLRESPONSIBILITYFOR DAMAGES TO PEOPLE, ANIMALS OR THINGS, RESULTING FROM THE FAILURE TO COMPLY WITH SUCH PROVISIONS. INSTALLATION Fastening the top Every cook-top is equipped with a special washer.
  • Page 5 INSTRUCTIONS FOR THE INSTALLER Gas Connection flame point as follows: - start the burner up Make sure that the appliance is adjusted for - turn the tap up to the minimum position (small the gas type available (see the label under the flame) appliance).
  • Page 6 10/A...
  • Page 7 600 mm HOBS 750 mm HOBS 900 mm HOBS 1 Rapid burner 3000 W 2 Semi-rapid burner 1750 W 3 Auxiliary burner 1000 W 4 Triple ring burner 3800 W 8 Control knob for burner...
  • Page 8: Technical Characteristic Tables

    TECHNICAL CHARACTERISTIC TABLES INJECTOR NORMAL NOMINAL NOMINAL HEAT TAPE BY PASS BURNERS PRESSURE DIAMETER INPUT (W) RATE DIAMETER N° DESCRIPTION mbar 1/100 mm 1/100 mm Max. Min. G30 - G31 28 - 30 3000 RAPID 115Y Reg. 3000 G30 - G31 28 - 30 1750 SEMI-RAPID...