Midea V6R Series Manual page 130

Project name and location
No. Parameters displayed on DSP1
1
Operation IDU quantity
2
System operation mode
3
High pressure (MPa)
4
Low pressure (MPa)
5
Subcooler outlet temperature
6
Subcooler inlet temperature
7
EEV position
8
Software version
9
MS Address
10
1
EBVA position
11 1
EBVB position
12 1
EBVC position
13
Port No. for refrigerant leakage alarm
14
Number of ports for refrigerant leakage alarm
15
Min (T2, T2B) of cooling operation IDU under the MS
Notes:
1. Number 10 to 15 are only for MS01.
V6R Series System Commissioning Report – Sheet G
1
1
System name
Remarks
Actual value
0-OFF; 2-Cooling Only; 3-Heating Only; 5-Main Cooling
Mode; 6-Main Heating Mode
Actual value = value displayed × 0.1
Actual value = value displayed × 0.01
Actual value = value displayed
Actual value = value displayed
Actual value = value displayed × 10
Actual value = value displayed
Actual value = value displayed × 10
Actual value = value displayed × 10
Actual value = value displayed × 10
Actual value = value displayed
If there are multiple alarms at the same time, only the
minimum port number is displayed
Actual value = value displayed
Actual value = value displayed
1
If there is no cooling operation of the indoor unit, the
digital display "-"
V6R VRF 50/60Hz
Observed values
Cooling Heating
mode mode
185