Setup - Televes H30+ Manual

H30+ H30D+ - CATV & DOCSIS 3.1 Meter /Analyzer
11.2. Map view
Graph showing the wifi networks. Each
triangle represents a network. The height
of the triangle represents the power of the
access point signal.

11.3. Setup

Press to change the Wi-Fi Scan options.
- Band: Select band to scan (2.4GHz, 5GHz or
both)
- Mode: Selects between Map or List View
- Sort: Only in List View mode. Allows to select
how to sort the Wi-Fi list: name, level, or channels
- Save datalog: Saves the current scan
measurements. You can see the datalogs
using the remote control application.
14. Setup
Change main configuration settings:
- Ter. Network: Aerial, Cable.
- Cable Standard: J.83-B / A.
- Ter. Plan: Selected Terrestrial plan.
- Language: English, Español.
- Units: dBµV, dBmV, dBm
- Quality profiles: Trunk, Tap, End Line,
Ground.
Different thresholds are available for different
testing locations.
- Analog Standard: Selects the standard
for the analog channels and changes
automatically the audio carrier to a value
according to the selected standard.
- Audio Carrier: 4.5 MHz, 5.5 MHz, 6.0 MHz,
6.5 MHz.
- Volume
- Network:
Setup: Manual, Auto.
When Setup Manual is selected, the user
must set the IP, gateway and DNS.
Gateway
IP
DNS
- Wi-Fi : Allows to connect the H30+/D+/
D+Adv to a Wi-Fi network.
Wi-Fi: On, Off
Scan: When Wi-Fi is turned on, shows a
list of all the found Wi-Fi networks.
22