Subscribe to Our Youtube Channel
Related Manuals for Televes H30 CRYSTAL
Summary of Contents for Televes H30 CRYSTAL
- Page 1 DVB Meter / Analyser with digital processing Instruction Manual Refs. 593601, 593602, 593603, 593604, 593661 593621, 593622, 593624 w w w . t e l e v e s . c o m...
-
Page 3: Table Of Contents
Index 2. Plans Safety requirements 3. SCR Symbols and safety labels Overview 4. Quality Profiles Introducing the H30Crystal. 5. Multiscreen Key Features 6. Clone General Specifications 7. Update References and options Mobile Devices App Technical Specifications 1.- Connection between the Description of equipment components App and the H30Crystal... -
Page 4: Safety Requirements
H30 CRYSTAL Safety requirements Servicing - There are no user serviceable parts except the battery. Do not attempt to service this product or Product inspection remove covers other than the battery cover. Refer - Inspect the equipment for shipping damage. -
Page 5: Overview
User friendly, handheld DVB meter. Introducing the H30Crystal. Complete portfolio of Analog/Digital measurements with easy-to-read pass/fail New from Televes, a go-to meter designed with the indicators. needs of a DVB installer in mind. Quick and easy to use interface with features... -
Page 6: General Specifications
H30 CRYSTAL General Specifications Display 2.8” TFT 400 x 240 full colour Weight 510g (12.12lb) Dimensions 175 x 100 x 52 mm / 6.9 x 3.9 x 2 in (H x W x D) Input: 100-240V~ 50-60Hz Power Source Output: 12VDC, 2A Battery Li-Ion smart battery (7.2VDC, 2300mAh) -
Page 7: Technical Specifications
Technical Specifications Up to 40dB Constellation Frequency Digital Measurements DVB-S Range 50 - 880 MHz and 950 - 2400 MHz MPEG image Resolution 125 kHz Power 45-110dBuV (25-120dBuV opt.593235) Tuning Frequency or channel CBER 9.9E-2 - 1.0E-6 Input VBER 1.0E-4 - 1.0E-8 Impedance 75Ω... -
Page 8: Description Of Equipment
H30 CRYSTAL Description of equipment Keyboard components Connectors and controls Device On/Off button: To turn the equipment off, press and hold for approximately 3 seconds. Back button: Return to the previous menu or close a parameter entry window. 1. External power connector (12VDC). -
Page 9: Power Supply
Power supply From a fully discharged state, a full charge takes A DC adapter is provided to power and charge the approximately 8 hours and a 3 hour charge will meter. Plug the adapter into a properly grounded provide approximately a 75% charge. electrical supply and the power connector on the The charge management system will detect side of the unit. - Page 10 H30 CRYSTAL Turn the H30Crystal off Place the new battery and then connect it to the power board OFF: > 3 sec. OFF: > 3 sec. OFF: > 3 sec. OFF: > 3 sec. OFF: > 3 sec. Remove the screws from the backside OFF: >...
-
Page 11: Before Starting
Before starting The first time you turn your H30Crystal on, please follow the next steps for a proper configuration: 1.- Select the language using 2.3.- If the PIN is OK, you have finished the registra- tion process. NOTE: Options 593234 (dCSS) and 593235 (Extended terrestrial input level range) will be activated automatically in your H30Crystal whenever you register it within 30 days after you... -
Page 12: Channel Info
Frequency plan - Auto mode (both Selective and Non- Selective models): On/Off. Allows to operate with the Auto mode of the Televes OPS3L, which communicates to the H30Crystal the lambda it is emitting. - Optical wavelength (only Non-Selective models): Allows to select the wavelength to be measured. -
Page 13: Spectrum
2.2. Setup cable services quality. 3.1. Main window Press to change the Channel Info options. Below is a capture of a Spectrum window with a brief explanation of its features: Span Selected channel User can change it using Change using - Band: Terrestrial/Satellite - Plan: Selects the channel plan - Powering: Selects the LNB powering... -
Page 14: Mpeg
H30 CRYSTAL parameters (multiswitch, standard and slots) When a slot is enabled (for example slot 3, 4. MPEG freq. 1210MHz), the meter will tune into the slot frequency (1210MHz) and will set the slot with the meter parameters: frequency, band The H30Crystal MPEG feature will show the image (powering), and DiSEqC. -
Page 15: System Scan
- Powering: Selects the LNB powering Measurements Channel - DiSEqC (only satellite band): Selects DiSEqC of the selected Change Channel parameter (Sat A, sat B, sat C, sat D) Frequency channel using plan - SCR (only satellite band): Selects the SCR with pass/fail parameters (multiswitch, standard and slots) indicators... -
Page 16: Dish Alignment
H30 CRYSTAL 6.1. Main window While the slot is enabled, all the setting changes of the meter, will be applied to the currently slot (SCR3). Below is a capture of the Dish Alignment window with a brief explanation of its features. -
Page 17: Satellite Test
7.2. Setup 7. Satellite Test Press to change the Satellite Test options. This function checks that the input signal corresponds to the selected satellite, and at the same time checks the proper reception of the selected transponders (from 1 to 4 transponders). To do that, the meter performs all the measurements on those transponders. -
Page 18: Constellation
H30 CRYSTAL The measurements made for analog channels are Ideally, each of the symbols in a constellation video carrier level and V/A. For digital channels the diagram should display a clean dot indicating a measurements are power and C/N. perfect signal. -
Page 19: Echoes
FFT mode, Guard - Band: Terr, Sat Selected channel Interval, and Cell ID - Plan: Selects the channel plan Change using - Powering: Select the powering of the LNB if needed. - DiSEqC: Select the SAT of the DiSEqC command. - SCR (only satellite band): Selects the SCR parameters (multiswitch, standard and slots) When a slot is enabled (for example slot 3,... -
Page 20: Video Camera (Opt. 593236)
H30 CRYSTAL 12. Wi-Fi Scan (opt. 593250) 11. Video Camera (opt. 593236) Analyzes the Wi-Fi band and automatically detects all the Wi-Fi networks, as well as their names and the power of the access point signal. This feature allows the H30Crystal meters to have... -
Page 21: Iptv (Opt. 593251)
12.2. Map view 13. IPTV (opt. 593251) This menu provides the necessary measurements Graph showing the wifi networks. Each and parameters to guarantee a correct reception of triangle represents a network. The height of the triangle represents the power of the IPTV services. - Page 22 H30 CRYSTAL - Channels: Allows to change the selected 13.1.2.2. Setup IPTV channel. - Save Datalog: Saves the current IPTV Press to change IPTV MPEG options. measurements. You can see the datalogs using the remote control application. 13.1.2. MPEG Using this function you can see the MPEG image.
-
Page 23: Setup
13.1.3.2. Setup Selected channel parameters Selected channel Press to change IPTV Services options. - Channels: Allows to change the selected IPTV channel. - Edit channel: Allows to edit the IP and the port of the selected channel. List of services and bitrates. Press OK to select a service Once you have selected a service, press OK to see... - Page 24 H30 CRYSTAL frequency. - Restore Powering: On/Off. When you turn As you can see in the image above, the list your H30Crystal on, the meter will set the last shows the name of the Wi-Fi networks and LNB configuration automatically whenever indicates if the network is open or restricted, this parameter is On.
-
Page 25: Firmware Update
Web Application Firmware Update First of all, connect your H30Crystal to the network Whenever your H30Crystal is connected to the using the Ethernet connector or the Wi-Fi interface. internet, it will automatically check if there is a Then you must find out the IP of your H30Crystal newer firmware version. -
Page 26: Plans
H30 CRYSTAL 2. Plans To change the display mode from calendar mode to list mode, just click on the corresponding button placed in the menu bar: In this window, you can see all the channel plans of your H30Crystal. Download/ 2.1.- Terrestrial, Satellite and Custom Channel... - Page 27 You can create a new channel plan from an existing The channel plans added from the repository will one by clicking on the corresponding button. Or be uploaded to your H30Crystal, but none of the you can start from scratch, by clicking on the “New channel plans in your meter will be removed.
-
Page 28: Quality Profiles
H30 CRYSTAL Save the profile in the meter 3. SCR Display to see all the Delete profile values Duplicate profile In this window, you can setup the multiswitches. The H30Crystal includes a list of multiswitches by default, but you can add more or edit any of the existing ones. -
Page 29: Update
Mobile Devices App on your computer. Then, connect other H30Crystal where you want to copy the configuration to and select the Import feature. 1.- Connection between the App and the H30Crystal Click to display the function You only need to have turn your H30Crystal on and follow these steps: 1.- Select Wi-Fi function in the Setup menu (see section 11.- Setup). -
Page 30: Features
H30 CRYSTAL mobile device will ask for the key, that is Televes1: Tapping on Info, the user can see the following screen: When the H30Crystal is connected, the icon is green 4.- Then, open the H30Crystal App. The App main screen looks like this: 2. -
Page 31: Multiscreen
When you tap on logger, the measurements in that will be displayed. Use these buttons as if they logger will be shown: were the device. Tap on the arrow button Tap on share to hide the keyboard Tap to delete Tap on key board buttons to manage the H30Crystal If the selected function is MPEG, the video is... -
Page 32: Files
H30 CRYSTAL image will not be displayed in real-time. The standard plans can be cloned. When the user does this, a new channel plan is added to the User channel plans list: 2.3.-Files Clone channel plan This feature allows to manage channels plans, SCR... -
Page 33: Scr
2.3.2.- SCR The channel plans in the user-list can be edited: Save changes This function opens a web navigator with the web page of your H30Crystal, and points directly to the Add new channel SCR section. See section 3.- SCR of the Web Appli- cation 2.3.3.- Quality Profile This function opens a web navigator with the web... -
Page 34: Settings
H30 CRYSTAL 2.4.1.- Info When you tap on the line corresponding to a channel, a pop up window will apppear, allowing the user to modify the IP address and the port: Using this function of the App, the user can see the App information, as well as the H30Crystal whenever it is connected to the App. -
Page 35: Clone
Then a web browser will be open configuration in all your H30Crystal meters. with the Televes Meter Registration web page. Re- gister your H30Crystal in our web. Once the pro- Make sure that the icon is green cess is completed, you will get a PIN code by email. -
Page 36: Error Messages
H30 CRYSTAL Error Messages Select the location where you want to save the configuration file LOW BATTERY Indicates that the battery is about to finish. The battery icon is red now. It is recommended to connect the meter to the external power source. - Page 37 Do not return the unit without first contacting Televes Technical Support. If the unit needs to be returned, Televes will arrange for free shipping. The unit will need to be appropriately packed for shipping. In compliance with IATA Regulations, when using our shipping service follow these instructions: Label the package.
- Page 38 H30 CRYSTAL DECLARACIÓN DE CONFORMIDAD DECLARATION OF CONFORMITY DECLARAÇÃO DE CONFORMIDADE DECLARATION DE CONFORMITE DICHIARAZIONE DI CONFORMITÀ DEKLARACJA ZGODNOŚCI KONFORMITÄTSERKLÄRUNG ΠΙΣΤΟΠΟΙΗΤΙΚΟ ΣΥΜΜΟΡΦΩΣΗΣ FÖRSÄKRAN OM ÖVERENSSTÄMMELSE ДЕКЛАРАЦИЯ СООТВЕТСТВИЯ ةقباطملا نايب www.doc.televes.com...
- Page 40 593601, 593602, 593603, 593604, 593661,593621, 593622, 593624_1.00_EN...
Need help?
Do you have a question about the H30 CRYSTAL and is the answer not in the manual?
Questions and answers