Table of Contents
Advertisement
Selected frequency
Change using
Red graph:
Yellow mark:
max-hold
indicates
Orange graph:
the selected
real-time
frequency in
Green graph:
the spectrum
min-hold
9.2. Setup
Press
to change Ingress Scan options.
- Ingress frequencies: 5-42 MHz, 5-66 MHz,
5-86 MHz, 5-206 MHz.
Select the span of the graph.
- Ref. Level: Select the reference level of the
bar graph
- Reset Data: Delete the max-hold and min-
hold graph
Level of the
selected
frequency
Red line:
indicates
the current
maximun
level
10. Speed Test
Allows you to check your basic network
performance parameters so you don't need to get
your laptop out.
This function attempts to connect to the server
(the server is selected automatically by the H30+/
D+/D+Adv by location), checks the DHCP protocol
and the connection to the Internet.
If it is all right, the H30+/D+/D+Adv makes a ping
to the server and shows the delay times.
Finally, the H30+/D+/D+Adv makes a download
and upload speed test.
To start a new test, press OK button.
10.1. Main window
Below is a capture of a Speed Test window with a
brief explanation of its features:
Public IP
Link
DHCP
check
check
Ping
Download and
delay
upload speed
ISP
Internet
IP
check
Server
name
19
EN
Advertisement
Table of Contents
